Welcome to our Online Music Store, with over
30 years of experience, hand picking the Best Pro
Gear & Accessories for you, at the Best Possible Price.
Shure P2RE2 Wired In-Ear Monitor Sys
This system includes:
- P2R Hybrid Bodypack Receiver
- E2 Dynamic-Driver Earphones
- 20 foot 1/4" cable
The PSM200 Peronal Monitor System is both a wired system and a UHF frequency selectable
system. There are 8 selectable frequencies with 4 compatible in each system. The
P2R Hybrid Bodypack Receiver can operate as either a mono wired receiver or a mono
wireless receiver, or both at the same time. With a 1/4" jack on its side the P2R
can receive an incoming signal from an instrument, clicktrack or mono mix. The E2
Earphones, with a stereo 1/8" jack, offer high fidelity sound and comfortable fit
and come complete with 3 sizes of earfoams (small, medium and large) and 3 sizes
of flex sleeves.
PSM200 System Features:
- 8 selectable UHF frequencies
- Includes E2 dynamic-driver earphones
- Mono mix
- Up to 4 systems can be operated simultaneously
P2T TransMixer Features:
- 2 mic/line XLR/1/4-inch combo inputs
- XLR SPLIT OUT connectors
- Input level controls
- Tri-color LED input level indicators
P2R Receiver Features:
- Combination wired/wireless compatibility
- Gain switch for setting line input sensitivity
- 1/4-inch line-level input jack to connect monitor mix, click tracks, effects, or
condenser microphones
- Integrated cable management groove secures cables connected to the bodypack
PSM200 System Specifications:
- RF Carrier Frequency Range: 518-865 MHz (country dependent)
- Operating Range: 100 m (300 ft) under optimal conditions
- Audio Frequency Response: 30 Hz to 12 kHz (+/-3dB); earphone dependent
- Total Harmonic Distortion (1kHz):<1% typical (ref. +/-35 kHz deviation)
- Modulation: FM +/-35kHz deviation (nominal)
- Signal-to-Noise Ratio: 80 dB typical (A-weighted)
- Operating Temperature: -7° to 49° C (20° to 120° F)
P2R Receiver Specifications:
- RF Sensitivity: -109 dBm typical
- Squelch Threshold: -102 dBm typical
- Antenna: Attached Whip
- Audio Input Connector
* Connector Type: 1/4" mono
* Impedance: 1 Mohm
* Maximum Input
Level: LO=+0dBu; HI=-10dBu
* Frequency Response: 30 Hz to 20 kHz (+/-3dB); earphone
dependent - Power Requirements: 9 V alkaline battery
- Battery Life: Volume dependent
* Wired (RF Off): 6 hours
* Wireless (RF On): 4 hours
- Audio Output Connector: 1/8" (3.5 mm)
- Minimum Load Impedance: 8 ohms
- Net Weight: 100 g (3.52 oz), less battery
- Dimensions: 122 mm x 73 mm x 32 mm (4.809" x 2.875" x 1.251")