|
Audio-Technica AT4040/SP
*Set of two mics
AT4040/SP Studio Pack includes:
- AT4040 side-address cardioid condenser microphone
- AT4041 cardioid condenser microphone
- AT8449 shock mount
- AT8405a stand clamp
- AT8159 windscreen
- Protective wooden storage case
The AT4040SP Studio Pack offers two of Audio-Technica s renowned 40 Series studio
condenser microphones: the AT4040 large-diaphragm side-address condenser and the
AT4041 cardioid condenser. Each microphone is transformerless, resulting in exceptional
transient response and extremely clean output signals; each is engineered to meet
the most critical acoustic requirements of professional recording, broadcast and
live sound. A shock mount, stand clamp and windscreen are included, along with a
protective wooden carrying case.
AT4040 Side-address cardioid condenser microphone
- Technically-advanced large diaphragm tensioned specifically to provide smooth, natural
sonic characteristics
- Externally polarized (DC bias) true condenser design
- Exceptionally low noise, wide dynamic range and high-SPL capability for greatest
versatility
- Transformerless circuitry virtually eliminates low-frequency distortion and provides
superior correlation of high-speed transients
- Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced
element stability and optimal sensitivity
- Open acoustical environment of the symmetrical housing assembly minimizes unwanted
internal reflections
- State-of-the-art surface-mount electronics ensure compliance with A-T's stringent
consistency and reliability standards
- Switchable 80 Hz hi-pass filter and 10 dB pad
AT4040 Specifications
- Element: Externally-polarized (DC bias) condenser
- Polar Pattern: Cardioid
- Frequency Response: 20-20,000 Hz
- Low Frequency Roll-Off: 80 Hz, 12 dB/octave
- Open Circuit Sensitivity: -32dB (25.1mV) re 1V at 1 Pa
- Impedance: 100 ohms
- Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D., 155 dB SPL, with 10 dB
pad (nominal)
- Noise: 12 dB SPL
- Dynamic Range (Typical): 133 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio: 82 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 48V DC, 4.2 mA typical
- Switches: Flat, roll-off; 10 dB pad (nominal)
- Weight: 12.7 oz
- Dimensions: 6.69" long, 2.10" maximum body diameter
- Output Connector: Integral 3-pin XLRM-type
AT4041 Cardioid condenser microphone
- Smooth, extended frequency response with a slight rise occurring in the high-frequency
region
- Ideal for drum overheads, acoustic guitar, piano, horns and under snare
- Low-mass diaphragm improves transient response, increases response bandwidth and
reduces handling and mechanical noise transfer
- Transformerless circuitry virtually eliminates low-frequency distortion and provides
superior correlation of high-speed transients
- State-of-the-art design and manufacturing techniques ensure compliance with A-T's
stringent consistency and reliability standards
- Switchable hi-pass filter and rugged turned-brass microphone housing
AT4041 Specifications
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 20-20,000 Hz
- Low Frequency Roll-Off: 80 Hz, 12 dB/octave
- Open Circuit Sensitivity: -36dB (15.8 mV) re 1V at 1 Pa
- Impedance: 100 ohms
- Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range (Typical): 121 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio: 70 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 48V DC, 3.2 mA typical
- Switches: Flat, roll-off
- Weight: 4.2 oz
- Dimensions: 6.28" long, 0.83" maximum body diameter
- Output Connector: Integral 3-pin XLRM-type
Special Order Item
Important Notice!
This is a special order item and may be non-cancelable and non-returnable. Your credit
card will be charged at the time of order. Average time of delivery will vary based
on product availability from the manufacturer. Please call us or email us for more
information.
|
