|
dbx DRIVE RACK-PX
Powered speakers are a beautiful thing. Everything you need bundled into one simple,
tidy, portable package. Just grab em and go, right? Well, you may think your powered
speaker system is complete, but you’re missing half the picture. DriveRack PX is
the other half. In another dbx industry first, we’ve created a processor specifically
tailored for powered speakers. Utilizing our highly-acclaimed DriveRack technology,
the PX picks up where your powered speakers leave off.
The DriveRack PX Powered Speaker Optimizer has everything you need to get the most
out of your stereo powered speaker system. It even includes stereo or mono subwoofer
support. With the included dbx M2 measurement mic, Auto-EQ corrects for audible deficiencies
in the room environment. Our patented Advanced Feedback Suppression (AFS"!) kills
nasty feedback, allowing problem-free operation at higher sound levels, while our
patented Subharmonic Synthesizer"! extends bass response for enhanced bottom end.
With all that, you also get classic dbx compression and the protection offered by
our graceful PeakStopPlus"! limiting. Your ears, your audience, and your powered
speakers will forever thank you.
In spite of all that sophistication, rest assured we won’t overcomplicate the simplicity
of your rig. Our exclusive Setup, Auto-EQ, and AFS Wizards, and out-of-the-box support
for a host of JBL and other popular powered speakers, make setup a snap. Louder,
cleaner, better sound than you thought possible from your powered speakers.
Features
- Stereo Feedback Elimination with 12 feedback notch filters
- Dual 28-band Graphic EQ
- Classic dbx® Compressor
- 120A Subharmonic Synthesizer
- Stereo Multi-band Parametric EQ
- Stereo PeakStopPlus"! Limiters
- Pink Noise Generator
- Auto-EQ with 28-Band RTA
- JBL® and other popular powered speakers included in Setup Wizard
- dbx M2 Measurement Mic and zippered pouch included
- Front panel RTA-Mic XLR input with phantom power
- 25 User Programs / 25 Factory Programs
- 2 Channel XLR Input
- 2 Channel XLR Output
- 2 Channel XLR Sub Output
- 24-Bit ADC/24-Bit DAC, >110 dB Dynamic Range
- dbx Type IV"! Conversion System
- Full Graphic LCD Display
Analog Inputs
- Number of Inputs: 2 (stereo) Line inputs; 1 RTA Mic input
- Connectors: 2 Female XLR line inputs; 1 XLR RTA Mic input
- Type: Electronically balanced, RF filtered
- Impedance: >40k ohms
- Maximum Input Line Level: +20dBu
- Input CMRR: >45dB
- RTA Mic Phantom Voltage: +15VDC
- RTA Mic EIN: >-110dBu, 22Hz-22kHz, 150 ohms
Analog Outputs
- Number of Outputs: 2 (stereo) Line outputs; 2 Sub outputs (mono or stereo)
- Connectors: Male XLR Line outputs; 2 Male XLR Sub outputs
- Type: Electronically balanced, RF filtered
- Impedance: 120 ohms
- Max Output Level: +20dBu
A/D Performance
- Type: dbx Type IV Conversion System
- Dynamic Range Line: >110dB A-weighted, 107dB unweighted
- Type IV Dynamic Range: 123dB with transient material, A-weighted, 22kHz BW; 121dB
with transient material, unweighted, 22kHz BW; 115dB typical with program material,
A-weighted, 22kHz BW
- Sample Rate: 48kHz
D/A Performance
- Dynamic Range: 112dB A-weighted; 110dB unweighted
System Performance
- Dynamic Range: 110dB A-weighted; >107dB unweighted
- THD+N: 0.002% typical at +4dBu, 1kHz, 0dB input gain
- Frequency Response: 20Hz-20kHz, +/-0.5dB
- Interchannel Crosstalk: <-110dB, 120dB typical
- Crosstalk Input to Output: <-100dB
|
