SHOPPING CART

e-commerce powered by

RC Enterprises LLC

(Redeemed w/PayPal Acct.)

This Site is

View Cart Cartheckout

QSC K12

QSC's K12 is a lightweight powered loudspeaker that features a 1000 Class D power module and is fitted with an identical woofer and a 1.75" HF transducer. The K12 also features auto-standby mode, XLR & 1/4" TRS mic/line level ins, RCA phono ins, direct outs on each channel, a balanced out for daisy-chaining up to three sources and extensive DSP processing. EQ settings for both the high-freq. and low-freq. transducers are adjustable on each unit. LEDs can be set to show when the unit is on or when its clip limiter has been engaged. The extended bass LF setting allows for integration of an external subwoofer into the sound system.

Features fly-mount options as well as the Tilt-Direct™ pole cup mounting system for a 7.5° downward tilt for better sound coverage. Multiple units can be daisy-chained for total gain control from a single remote pot. Also features a steel grille and is housed in an ABS enclosure.

• QSC K12 Powered PA Speaker Features:
• 12" LF driver, 1.75" HF driver
• Frequency Respnose: 48Hz-20kHz
• Max SPL: 131dB
• 1,000 watt, efficient and light-weight class-D power module
• Directivity Matched Transition (DMT) and Intrinsic Correction DSP tuning for accurate, undistorted performance across the entire sound field
• GuardRail technology discreetly protects the system from damaging overload
• Deep mode for enhanced low-frequency extension without a subwoofer
• Locking IEC power cable
• XLR and 1/4" connectors
• Phone Mic/Line and Line inputs with Loop-thru connectors and independent level controls.
• Phono (RCA) inputs
• Front mounted LED may be switched off or indicate "Limit" or AC Power On
• Dual angle, 35mm pole socket with Tilt-Direct allows the speaker to be angled down
• Suspension and yoke mounting accessories available
• 4" voice-coil woofer design for reduced weight
• 1.75" voice-coil compression driver
• High Pass Filter for use with subwoofers
• Threaded pole socket for solid, secure pole mounting
• Dimensions 23.7" x 14" x 14"
• Weight 41 lb / 18.6 kg

Features

• Lightweight portable powered speakers with legendary QSC amplifier power and reliability
• 1000 watt Class D power modules in all models
• Extensive DSP enhances system performance
• Attractive and professional appearance
• Rugged ABS enclosures
• Tour-grade 18 gauge steel grilles
• Comfortable ergonomic handles
• 35 mm pole sockets with Tilt-Direct™ (fullrange models)

The QSC K Series is quite simply The New Standard in lightweight powered loudspeaker systems. Under the direction of Pat Quilter, QSC's team of amplifier engineers have created a new standard in Class D power modules unparalleled in the industry. Next, breaking from the traditional loudspeaker paradigm, every model is fitted with the identical 1.75" HF device (fullrange models) and woofers of the same high quality for unparalleled performance, regardless of speaker size.

Extensive DSP processing is employed throughout, providing levels of sonic clarity and total output that defy the system's size and weight.

Premium-grade materials, advanced construction processes and multiple mounting and suspension options allow for a wide range of live and installed applications.

Combo XLR and 1/4" TRS inputs accept both Mic and Line Level input while a set of RCA phono inputs (except KSub) allow additional connectivity to portable MP3 players, CD players and line-level mixers. Up to three audio sources can be mixed internally and summed to a balanced output for "daisy-chaining" of multiple units. Separate direct outputs are also provided on each channel for additional output flexibility.

On-board switches provide preset EQ settings. The HF setting (fullrange models) can be set to VOCAL BOOST for additional presence in the critical mid-frequency area or FLAT for accurate reproduction of the incoming signal. The LF switch can be set to NORM, DEEP™ for additional bass extension, or EXT SUB (fullrange models) for use with an external subwoofer. The rear panel LED switch can be set to POWER, illuminating the front-mounted LED when the unit is powered on, OFF for applications where it is not desirable to illuminate the front LED, or LIMIT which indicates to the system operator that the clip limiter circuit has been engaged during operation.

Fullrange models are housed in rugged ABS enclosures with a professional appearance that is at home in any application. ABS is a far more robust material than conventional speaker plastics and offers an additional measure of sonic clarity due to its internal rigidity. Ergonomic aluminum handles and a highly protective steel grille complete the package for ease of transport and long term durability.

The K Series fullrange models feature a unique Tilt-Direct™ pole cup mounting system. A simple turn of the dial engages a 7.5 degree downward tilt of the speaker allowing acoustic energy to be kept on the audience and off reflective surfaces for applications where maximum coverage from a high-positioned speaker is desired. Integrated M10 suspension points allow for suspended applications with a K SERIES M10 KIT (sold separately) or Yoke bracket (sold separately).

Extensive DSP

• DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
• Intrinsic Correction™, first featured in our high-end line-array products maps 65-75 spacially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat bandpass target. The result is a speaker that behaves equally well across the entire sound field.
• DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
• GuardRail™ protection, first introduced on our GX Series amplifiers protects both the amplifier module and your performance from unnatural and destructive clipping.

Specifications

Configuration 12” Multipurpose 2-way

Transducers

 Low-frequency 12” cone transducer

 High-frequency  1.75” diaphragm compression driver

Frequency Response (-6 dB) 52 Hz - 18 kHz

Frequency Range (-10 dB) 48 Hz - 20 kHz

Nominal Coverage (-6 dB) 75° conical

Maximum SPL (1 meter) 131 dB peak

Amplifiers

Power Output 1000 W Class D

(500 W LF, 500 W HF)  

Input Impedance (ohms) XLR / ¼": 40k balanced / 20k unbalanced

XLR / ¼" MIC mode: 2260 balanced

RCA: 10k

Controls Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)

Indicators Power, Signal A, Signal B, Standby, Limit, Mic

Connectors Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector

Cooling On demand, 50 mm variable speed fan

Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™

Transducer Protection Thermal limiting, excursion limiting

AC Power Input Universal power supply 100 - 240 VAC, 50 - 60 Hz

AC Power Consumption

(1/8 Power) 100 VAC, 2.3 A

120 VAC, 2.01 A

230 VAC, 1.13 A

Enclosure

Material Impact resistant ABS

Finish Black paint

Grille Black powder coated 18 gauge steel

Dimensions (HWD) 23.7" x 14" x 14"

603 mm x 356 mm x 356 mm

Weight (Net) 41 lb / 18.6 kg

Available Accessories K12 TOTE, K12 YOKE, K SERIES M10 KIT

List Price  $999.95

Your Price  $799.00

QSC K12 12" Powered Loudspeaker

Eligible for Free Ground Shipping

* May be used as Mains or Monitors